GENERAL INSURANCE BLOG

Many young bikers love to install pressure horns and modified silencers on their bikes to show off, seek attention, stand out in a crowd, and make their presence felt. It is their style statement and a way of saying they have arrived.

However, people around you can get distracted and panicked when you suddenly blow your high-decibel pressure horn in a crowded street. They may lose their balance and control, may swerve, and meet with an accident.

Here are the consequences of installing pressure horns and modified silencers on your bike.

1. Fines:
The Motor Vehicles Act of 1988 is an act that consolidates and amends the laws that govern motor vehicles and their running in India. According to the amendment of section 190(2) of the Motor Vehicles Act in the year 2019, causing air and noise pollution by installing pressure horns and modified silencers on your bike can attract a penalty of up to Rs.10000/- and imprisonment of up to six months. This fine will be imposed if your pressure horn or modified silencer produces more than 80 decibels of noise.

2. Functioning and mileage:
Other than attracting fines and penalties, we should also consider the consequences of installing pressure horns and modified silencers on the functioning of our bikes. Pressure horns create undue load on the battery of our bike. It can make it weak and damage it in the long run. If we have not used the bike for long and the battery is not charged, using the pressure horn in stationary mode can kill the battery. You will not be able to use the self-start option in this case and get stuck.
Installing modified silencers may sound cool, but it can worsen the mileage of your bike by around 15%-20%. Modified silencers directly impact the engine pulling capacity of your bike. You may need to go for an engine tuning too. An acceleration tuning setting of your engine due to a drop in its pulling power can lower the mileage of your bike.
Modifying silencers will also involve changing the original angle of the exhaust opening. This may increase the total length of your exhaust pipe and the number of bends in it. Both cases lead to a lowering of the velocity of gases movement in the exhaust, resulting in a higher generation of emissions. Higher emission means higher fuel consumption.
Hence, be ready to shell out more on your fuel cost with modified silencers. Also, it can damage your bike engine too in the long run.

3. Drain on your wallet:
No modification to your bike comes for free. The same applies to installing pressure horns and modified silencers on your bike. A pressure horn can cost double the regular horn in a bike or even more. Garages charge hefty amounts starting from INR 2500 and above for silencer modification of your bike.

Installing pressure horns and modified silencers on bikes is usually a style statement for the young generation. Bike enthusiasts love to fiddle with their bikes and make them look fancy. Customising the bike can make you stand out in the crowd. However, such modifications pose a negative impact on the environment and people. We should understand that high noise emission often leads to nuisance creation on the roads and disturbs people around us.

As a responsible driver and law-abiding rider, always follow the traffic rules and avoid the above modifications, which may land you in trouble. Also, be sensible to have two wheeler insurance online India to avoid any financial hassles against mishaps and accidents. Premium amounts can be easily compared between various policies and involve no paperwork. Also, it secures and covers you like any other offline policy without compromising quality.

Click HERE to buy your two wheeler insurance online India.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.

In India, the majority of motorcycles lack a slipper clutch. While learning motorcycle, many people find it challenging to downshift correctly. The engine comes under stress because they typically downshift while holding the clutch, which results in the higher gear accelerating harder than the lower gear at the same speed. To match that speed on the lower gear for a seamless transfer, one should preferably rev a bit higher before downshifting. Otherwise, you would be "engine-braking," which is not an intelligent way to slow down.

The correct way of downshifting is to blip the throttle between shifts to match the revs to the speed. This is also known as revving. In this post, we are talking all about it. So, without further due, let's get into it.

How to rev-match correctly?
● As you press the brakes, hold the clutch and downshift as you start to slow down (do not release the clutch yet).

● Now, "blip" the throttle while maintaining clutch pressure to increase engine RPM gently.

● As soon as the engine starts to rev, let go of the clutch instantly.

● Don’t forget to keep carefully applying the brakes. When you downshift, the aim is to match the revs needed for the bike to move at that precise pace.

● If your bike jerks and slows down unexpectedly, it means that the engine's RPM wasn't high enough. Try to rev it up further the next time you try it.

● The last step would be to practice and practice. Getting it right the first time is not necessary. Don't give up. You will learn how to downshift with time.

The importance of rev-matching.
Now that you know what occurs when your motorbike is rev-matched, let's talk about its significance. Downshifting without rev-matching may cause a significant shock in the motor while travelling at high speeds, especially on large bikes with high horsepower output. The result will be a back wheel that hops, skips, and steps out of alignment. In a scenario like this, controlling the motorcycle at high speeds requires excellent control and precision. The shock won't be as extreme or dramatic on motorcycles with less power, but it still has the potential to cause an accident.
Matching your RPM reduces engine wear and tear, yet another crucial justification for rev-matching. The shock that results from improper rev matching puts more strain on the engine and gearbox, among other parts.

Does rev matching consume more fuel?
The forceful use of the accelerator does cause it to use somewhat more fuel, but only little than usual.
If done properly, rev-matching can assist you in downshifting efficiently and reduce stress on your engine and clutch. It's a tactic that bikers employ frequently. It's crucial to keep in mind that you don't have to match your revs perfectly at first when you're practicing. To master, like with any other ability, rev-matching needs considerable practice. You will eventually be able to tell when your engine and road speed are in sync.

Take your first step towards rev-matching today, and don't forget to be safe. Riding on roads is always an invitation to mishaps that may be a potential threat to you and your bike. Always stay alert while riding, wear a protective gear helmet, and avoid overspeeding. Do not forget to invest in the best bike insurance for an additional safety net over your bike. Buy bike insurance online today and gift yourself with benefits that will eliminate the financial stress off you during panic situations.

Click HERE to buy bike insurance online and get rewarded with effective benefits.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.

If you are a biker, you know the importance of maintaining your bike in top-quality condition. Some people learn ways to keep their bikes on their own, while others depend heavily on mechanics and service stations to maintain their vehicles properly. In this article, we will understand the functions of one of the most vital components of a bike, the spark plug, and how to maintain and change it.

What is a spark plug?
A device that delivers electric current to the combustion system via the ignition point is known as a spark plug. A spark plug ignites and fuels the vehicle using an electric spark while maintaining the engine pressure.

What key dimensions do you need to look for in a spark plug?

1. Diameter:
The right diameter is imperative for the proper functioning of the spark plug. The wrong diameter can affect the internal components and damage the bike.

2. Reach:
The spark plug's optimal range or reach determines its ignition capacity. If the length of the spark plug is too short, it will fail the ignition. And if it is too long, it might ignite pre-emptively or get jammed and hit the valve inside.

3. Range:
The range of the spark plug is calculated by the distance from the insulator's tip to the ceiling ring. A longer distance will heat the plug and cause pre-ignition, while a shorter range results in a colder plug resulting in easy wear and tear.

4. Gap:
The distance between the centre and the grounded electrode is known as the spark plug gap. The bigger the size of the gap, the bigger the spark produced.

What are the indicators of a damaged spark plug?

1. When you stop the bike, and the engine starts sputtering or idling, it indicates a failed spark plug.

2. If you have trouble starting your bike engine, it could indicate trouble with ignition and the spark plug.

3. If you notice corrosion in various parts around the spark plug, then it is high time to change your spark plug.

4. You might have a faulty spark plug if you notice a poor fuel economy.

Various other factors are indicators of a faulty spark plug. If you notice any problem while riding your bike, it is best to take your vehicle to a mechanic and inspect it as soon as possible.

How to change a spark plug at home?

Although it is advisable to make any changes to your bike under the supervision of a trained mechanic, if you want to change your spark plug, the following list will help you with that.

1. The first thing that you need to do when changing a spark plug is to pull the cap and remove the wire. Remember to do it gently, as a sudden tug or pull can damage the connection and prevent the ignition from happening.

2. Attach the ratchet to the plug and make sure that the plug is fitting properly inside the socket. Using the ratchet, turn the spark plug till it is loose, and then carefully remove it.

3. Inspect the plug for oil and soot deposits or other damage. If the spark plug is greasy and dirty, it is high time to change it with a new one.

4. Before fixing a new spark plug, it is better to check for the range, diameter, and space of the spark plug. The exact spacing of the spark plug will be mentioned in the user manual.

5. Clean the new spark plug and place it neatly to ensure it fits properly.

6. Tighten the spark plug and put the cap back on.

These were the steps you need to follow when you want to change the spark plug of your bike. Remember that if you notice any abnormality with your bike and experience trouble while driving, it is best to get it checked by a mechanic. Invest in bike insurance to safeguard yourself against the cost of repair and maintenance. Bike insurance adds value to your bike and helps you gain a better riding experience with more focus on security and less financial stress.

Click HERE to buy bike insurance.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.

Maintenance workers are a highly underrated and neglected section of any organisation until a problem arises. Their day-to-day work requires many risky tasks as they have to come close to machinery or processes and repair them.

Such activities may include the disassembly and reassembly of complicated machinery. The chances of accidents are always high for them as maintenance activities are usually unplanned and involve the possibility of human error.

Let us learn about the best tips for ensuring the safety of maintenance workers.

1. Plan and stick to a schedule:
Maintenance activities should always be planned in advance so that workers get time to do a risk assessment and be mentally prepared for it. A regular safety check schedule should be put in place so that the maintenance workers know in advance the potential hazards of the task.
The tools and personal protective equipment (PPE) should be checked for safety on a routine basis. Proper planning and making a schedule for safety checks will also help the maintenance workers to sharpen their work skills according to the specific needs of the task.

2. Authorisation:
The proper authorisation should be in place for the operation of critical machinery. Only a few should have authorised access to critical work areas or permission to go near critical and complicated machinery. Power should be turned off when the machines are not working. The proper authorisation will ensure that no one turns on machinery or part of it while the maintenance workers are working on it.

3. Appropriate equipment:
The management should ensure that the maintenance workers have the appropriate equipment to perform their tasks. The workers should also consistently check on their equipment, whether a small drill machine or a welding machine. It should not happen that equipment fails to operate while performing a maintenance process and puts the worker and his team in danger.
The management must also ensure that they constantly upgrade and modernise the equipment to match the need of the hour and are not obsolete.

4. Working as a team:
Maintenance works are usually sudden and critical in nature. They come up when something important, such as the main production process, has stopped. The maintenance workers should work as a team because a lack of coordination in maintenance activity may lead to accidents and injuries.
The team should follow all the required safety processes and protocols. Also, they should do a thorough after-use check of all the critical equipment and tools they use. This will ensure the tools are fit for the next maintenance assignment.

5. Final checks and inspection:
The maintenance workers should thoroughly inspect the repair work they have performed. They should do a trial run of the machine only after they are fully satisfied with their work and are sure that everything is back in order. This will ensure their safety as otherwise, they may meet with an accident in case of incomplete repair work.

Maintenance workers are an essential part of an organisation's workforce. They put their lives at risk to fix the errors and bring back life to the stopped processes. While ensuring the safety of the maintenance workers, any company must also go for public liability insurance. It will protect the company if any third-party liability arises from accidents, injuries, or property damage.

Public liability insurance prices vary with a business's individual needs and the scale of its operations. One should compare the prices of policies available with different service providers and then make the purchase decision accordingly.

Click HERE to learn more about public liability insurance prices in India.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.