GENERAL INSURANCE BLOG

Motorcycles require more maintenance than anticipated to stay up and running. Over a period, your bike tends to undergo severe wear and tear. One way to keep it functioning is by regular maintenance.

Oil leakage is a strong indicator of your bike being internally damaged. Figuring out the point of the leakage can seem like a difficult task, but there are a few methods that you can keep in mind to ensure your bike is not susceptible to oil leakage. The leading cause of oil leakage is worn-out oil filters. Broken seals in the oil filters allow the oil to escape, thus causing leakage.

In this article, we will discuss a few ways you can detect if your bike is leaking oil.

1. Filter cup:
A filter cup that is worn out or has misaligned fibres can cause the oil to spill out. The misalignment in the filter cup can be caused by improper tightening of fixing screws. Check for leakage around the cup, and if it is leaking from the bottom, tighten the hose clamp.

2. Carburetor:
A carburetor is an essential part of the engine. It controls the flow of air and fuel and assists in combustion. The bowl that holds the carburetor can cause leakage if it gets old and is incapable of sealing the carburetor properly.

3. Checking fuel levels:
Another foolproof method of figuring out oil leaks is checking the fuel level of your bike with a dipstick. After the bike has cooled down, take note of the dipstick levels. If you notice a change in the levels over time, there is a loss of fuel.

4. Clean the areas:
The most susceptible areas to oil leaks are oil filters, oil pans, filter cups, valves, and hoses. Detecting an oil leak is convenient by inspecting these parts. If you observe changes in these areas, there is a chance of spillage or oil leakage.

5. Use a cloth or a paper:
Putting a dry cloth or a piece of paper under the bike is another smart way to check for oil leakages. Leave these under the bike overnight, and if you notice any spots or stains, your bike's fuel is leaking.

6. Smoke from exhaust:
Sometimes you can tell about oil leakage by checking the smoke from the exhaust. While riding the bike, if you feel that the smoke coming out from the exhaust smells like burning oil, it is probably an indicator of oil leakage.

These are a few ways to detect oil leakage from your bikes. Leakage is usually an indication of improper maintenance and extreme wear and tear of your bike. To combat these problems and increase your bike's longevity, you must ensure your motorcycle undergoes proper care and regular servicing.

Problems like oil leaks can cause severe internal damage to your bike if left untreated for too long. If you miss out on these simple steps, you may have to replace various bike parts, which can be expensive. It is advisable to invest in a comprehensive bike insurance plan to avoid these extra expenses. By buying bike insurance, you ensure that your bike gets complete financial protection against any costs that will follow if it gets damaged due to an accident.

Click HERE to know more about bike insurance.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.

We all know about the various traffic rules to abide by the motorcycle riders. As essential as following the traffic signals, learning and understanding all the warning signals that your vehicle gives you is equally important.

If you own a two-wheeler, you must be familiar with its parts and how every element contributes to the overall working of your vehicle. However, people often ignore maintaining or paying attention to the motorcycle's needs. Being too occupied with the hustle of daily life, you may neglect your motorcycle's deteriorating condition and continue using it in that state. This negligence can result in unfortunate occurrences.

What are the warning signs in a motorcycle?
Your motorcycle is designed to alert you of its needs and requirements. Every two-wheeler has a dashboard equipped with warning lights that flash as coloured symbols when a problem arises. While every two-wheeler differs, its dashboard typically consists of the speedometer, RPM meter, and fuel gauge. Next to these numbered dials are a bunch of warning lights that flash in various colours.

These warning lights in a motorcycle mostly follow the same system as the traffic lights to display the severity of the warning.

Blue or Green: the motorcycle's system is active and functioning correctly.

Orange: Something is malfunctioning and must be looked into as soon as possible.

Red: A defect has been detected in your motorcycle's system, and you must stop driving as quickly as possible.

Here are the few commonly found warning lights.

1. Engine temperature:
Regular usage of the motorcycle can overheat the engine. In this case, the engine's temperature rises, and the surrounding components are prone to damage. The dashboard will flash a red warning light in the shape of a thermometer to warn the rider about this overheating.
When this warning light is displayed, the best thing to do is stop riding the vehicle. It is essential to rest and let the engine cool down. Riding an overheated two-wheeler can be risky.

2. Oil pressure warning:
Oil is used as a lubricant in every motorcycle to reduce friction between its moving parts and gears. The oil pressure warning light will flash on the dashboard to alert the rider of low oil levels. Low oil pressure can damage your vehicle's engine and severely affect the bike's performance.

3. Engine management warning:
This orange warning sign is responsible for alerting you about a broad set of features that may be malfunctioning either collectively or single handedly. While the signal usually stops flashing after a few seconds of ignition, the vehicle could have issues involving its emissions, air intake, fuel, etc. Although you may have purchased reliable 2 wheeler insurance online, you must remember that riding the motorcycle, despite this warning, can be destructive for the bike and your safety.

4. The indicators:
These are green warning signs on the dashboard that blink when the rider clicks on the indicator while turning.

5. Neutral indication:
A green warning sign simply indicates that the bike's gearbox is in neutral gear.

It is important that you remember these warning lights are installed to protect you. You might have opted for 2 wheeler insurance online to protect your vehicle, but understanding the functioning of your bike and regularly maintaining it is your responsibility.

Click HERE to buy 2 wheeler insurance online.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.

You are aware of the importance of cleaning and maintaining your two-wheeler, which can help you extend the life of your vehicle. But do you know that the trunk is often the most neglected space of your two-wheeler?

Your helmet, papers, groceries, umbrella, water bottles, etc., are primarily stored in the trunk of your two-wheeler. This makes it most susceptible to dust and dirt. In this article, we will take a look at a few easy ways to keep your trunk clean.

1. Organize:
The first step to maintaining a clean trunk is to keep everything organised. Try keeping your papers, first aid, and helmet systematically instead of throwing them into the boot. Store the essential documents in clean zip-lock plastic to avoid tears. Keep the first aid in a small pouch for easy access in an emergency. Efficiently organising the materials within the trunk helps you keep the space clean and provides you with easy access whenever you want something.

2. Dry cloth:
We tend to keep the helmets or wet umbrellas directly inside the trunk without giving a thought. One way to ensure clean trunk space is always keeping a dry cloth handy. If it is necessary to keep your wet umbrellas in the boot, keep the umbrella in plastic before placing it into the boot. To ensure that there is no water left, take a dry microfiber cloth and pat dry the area inside the boot. Do not forget to dry the area just under the seat as well. Moisture can lead to corrosion, eventually eating up the entire chassis. To avoid this, always ensure that your vehicle is dry.

3. Use sprays and cleaning solutions:
Ever so often, use mild cleaning liquid to clean the space out. Use a damp cloth to wipe down the area. After this, use the soap to wipe down inside the boot. Use a dry cloth to wipe off any remaining liquids to avoid stains.

4. Accidental spills:
Sometimes, we forget our shopping bags and end up stuffing our trunks with groceries and other essentials. This can create a chance of an accidental spill. Always use a dry cloth and a plastic container to take out the waste. After clearing out the spill, use a wet cloth to wipe down the boot’s insides. Use a non-corrosive spray or a sanitizer to get rid of the greasiness. Use another dry cloth to get rid of the residue. If you notice any dirt inside the nooks and corners, use an old toothbrush or a makeup brush to reach the area and clean out the excess gunk.

These are a few ways in which you can ensure clean trunk space. In the future, if you wish to sell your bike, a well-maintained and clean vehicle is a testament to the excellent ownership displayed by you. Another way to add value to your vehicle is by investing in the best two wheeler insurance in India. Being a responsible owner, you must ensure the safety of your two-wheeler by having the best deals to get guaranteed financial protection against any accident.

Click HERE to know more about the best two wheeler insurance in India.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.

Workers are the backbone of any manufacturing facility. Working relentlessly to get the best quality products is a result of their hard work. But sometimes, we tend to neglect the importance of these workers and take their safety for granted. Inspection of workspace safety throughout the day is one way to ensure a safe environment in the factory. This also shows that you care for your employees and their well-being. Safe working spaces have a direct effect on the productivity of the workforce.

In this article, we will discuss a few ways in which you can ensure the total safety of your workers.

1. Usage of machines and their maintenance:
Improper use of machines is one of the leading causes of workplace injury. Using tools and equipment for their intended purpose only is the first step to avoiding an accident. For the newer workforce, orientation sessions can be conducted to familiarise them with the latest tools and machinery. Regular cleaning and inspection should also be made part of their work to ensure added safety and extended lifetime of the machines.

2. Clear the aisles:
Aisles are the most used parts of a factory. Be it the moving of various things from one place to another or simply the employee movement within the facility. It is extremely important to frequently clean the space if the area is used for liquids and other greasy materials. Clean up any spillage immediately to ensure the best working conditions. Also, make sure that there are no small parts of the machinery lying around that might cause tripping and falling.

3. Keep emergency exits clear:
Blocked emergency exits have been the reason for some of the most dangerous and fatal hazards in manufacturing units and factories. To ensure safe access to the exit, avoid blocking emergency exits. A cluttered work area will also pose a danger if one wants to exit immediately. Placing different objects in their specified storage areas will help keep the work area clean and organised.

4. Eliminating fire hazards:
Working with combustible materials can pose real threats to your factory and the people working in it. If you work with combustion tools, keeping only the required amount at hand can ensure a lesser chance of any danger. When not using the chemicals, keep them stored in a cool dark place away from ignition points. Do not forget to store the waste in metal holders and dispose of it daily.

5. Take breaks:
Work-related injuries are caused due to strained muscles and over exhaustion by the workers. When tired and burnt out, one finds it difficult to focus and deliver top-quality work. Instead, taking regular breaks ensures alertness during work. Providing the workers with proper restrooms and clean drinking water facilities is another way to ensure that your workers are taken care of and that you care for their well-being. A rule of thumb is to allow a fifteen-minute and a thirty-minute break for working for four hours and six hours, respectively.

These are a few ways to ensure that your workers are safe at the facility. Investing time and efforts for the well-being of your workers will provide a dedicated workforce that delivers top-quality outcomes. To add more value to their lives and work, invest in public liability insurance to help them and your factory in an emergency and cover the medical and other expenses incurred during the process.

Public liability insurance is a safety net that provides financial protection if your business faces a compensation claim due to a worker’s injury or property damage. Do not forget to look for the best public liability insurance India options.

Click HERE to find out more about public liability insurance India.

Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.